|
|
Home | Products | Water Facts | About Us A New Generation of Recirculation Pumps…Saves Water! Saves Money! Saves Time!
The Autocirc pump is installed under the sink or faucet farthest from the water heater — where hot water usually takes the longest amount of time to arrive. A built-in temperature sensor automatically turns the AutoCirc pump on when the water temperature in the hot water supply line cools down to 85 degrees Fahrenheit. This cool water in the hot water supply line is then pumped into the cold water line and back into the water heater. The Autocirc pump turns off automatically when the hot water supply line to the faucet reaches 95 degrees, ensuring the instant availability of shower warm water with maximum temperature hot water only seconds behind. When the pump is automatically turned off by the built-in thermostat, an auto closure device prevents hot or cold water from mixing in either supply line. Hot water will be instantly available at all other faucets in the supply line between the water heater and the faucet where the AutoCirc pump is installed. 3-page PDF Link: How AutoCirc Works; Q&A
Typical System Layout
US Patent Nos: 5,143,049 / 5,942,275 / 5,944,221 / 5,983.922 / 6,026,844
Toll Free: 1-877-836-2800 | Email us: info@TryWaterWorks.com Copyright © 2006, SB Enterprises/Water Works
Pure Water Systems
|